OCR Simple SolutionsInnovative solutions to everyday problems

Ergo-K · a convenient grip on the outside of the reservoir

Handle and single-use glue tube included. Coffee maker and reservoir are shown for demonstration and are not included.

Household Items · Coffee Station

Ergo-K™

Handle for compatible Keurig® water reservoirs

One Hand on the Reservoir.
One Hand to Steady the Machine.

Add a convenient lifting point to the outside of your water reservoir. Once securely bonded, Ergo-K lets you lift and position the tank with one hand while your other hand stabilizes the coffee maker.

Buy on Etsy Watch Demonstration Videos

Opens Etsy in a new tab. Check reservoir compatibility, current price, availability, and shipping before ordering.

Exterior attachmentGlue tube includedPermanent adhesive bond

Allow a full 24-hour cure before filling, lifting, or using the reservoir. Not compatible with every Keurig model.

The Problem

A Refill Can Feel Like a Three-Handed Job.

  • A full water reservoir can be heavy and awkward to grip.
  • Holding the reservoir with both hands leaves neither hand free to steady the coffee maker.
  • The machine can slide as you try to align and replace the tank.

The Solution

A Handle Where You Need It.

  • An exterior handle adds a convenient lifting point to a compatible reservoir.
  • Once the adhesive has fully cured and the attachment is secure, use one hand to lift and position the tank.
  • Keep your other hand free to stabilize the coffee maker as you replace the filled reservoir.
01 / GRIP

Get a More Convenient Hold.

The exterior handle provides a dedicated place to grip a compatible reservoir.

02 / STEADY

Free Your Other Hand.

Hold the reservoir with one hand while using the other to keep the coffee maker in place.

03 / REFILL

Make Replacement Easier.

Guide the filled tank back onto the machine with more control.

See It in Action

Watch Demonstration Videos

Start with the installation video, then see the fully attached handle used during a refill.

Wait the full 24 hours after attachment before filling, lifting, or using the reservoir.

How to Attach Ergo-K

About 1 minute 15 seconds · attachment demonstration.

How to Fill and Replace the Reservoir

About 1 minute 8 seconds · refilling and returning the tank.

Installation

Position Carefully.
Bond Securely.
Wait 24 Hours.

The adhesive attachment is intended to be permanent. Review placement before opening the glue.

  1. Review the photographs and installation video before beginning. Confirm that your reservoir has a suitable smooth exterior attachment area.
  2. Determine the handle position on the upper third of the reservoir’s exterior. Confirm the placement before applying glue; the attachment is intended to be permanent.
  3. Make certain the attachment area is clean and completely dry.
  4. Crack the seal on the included miniature super-glue tube. Follow the glue’s instructions and warnings.
  5. Apply a thin coat of glue to the Ergo-K™ attachment arms.
  6. Position the handle and press it firmly against the reservoir for one full minute.
  7. Allow the adhesive to harden undisturbed for a full 24 hours before filling, lifting, or using the reservoir. Do not test the handle or place weight on it during this curing period.

After the Full Curing Period

Test the attachment over a sink before carrying a completely filled reservoir. Inspect the attachment periodically, and discontinue use if the handle becomes loose or damaged.

Before You Order

Check Your Reservoir First.

A practical accessory for compatible coffee makers in home kitchens, offices, and coffee stations.

Will it fit my reservoir?

Keurig® reservoir sizes and shapes vary. Ergo-K is designed for reservoirs with a suitable smooth exterior attachment area near the upper third of the water tank.

It is not compatible with every Keurig model. Compare your reservoir with the photographs and compatibility information in the Etsy listing before ordering.

What is included?

One Ergo-K™ handle and a small single-use tube of super glue. The handle attaches only to the reservoir’s exterior and does not contact its drinking water.

Adhesive precautions

Cyanoacrylate adhesive bonds skin and eyes rapidly. Follow all instructions and warnings supplied with the glue, use it in a well-ventilated area, and keep it away from children.

Do not test or place weight on the handle before the complete 24-hour curing period has passed.

Independent accessory

Ergo-K™ is an ErgoMug product from OCR Simple Solutions. Keurig® is used solely to identify product compatibility. Ergo-K and OCR Simple Solutions are independent and are not affiliated with, sponsored by, or endorsed by Keurig.

Ergo-K™

A Better Grip for Your Next Refill.

Visit Etsy to review compatibility, current pricing, and shipping details.

Buy on Etsy
Ergo-K handle on a coffee-maker reservoir